HRAB Regulating Valves

HRAB regulating valves are designed to regulate the medium flow with a cone on the underside of the valve disc. The stem sealing is provided by a threaded bush and a metal bellows for a complete hermetic sealing.

AWP regulating valves with metal bellows are designed for installation in the refrigerant circulation of industrial refrigeration systems. Actuation is by hand wheel or ratched. These valves are both regulating and shut-off valves. Rotating the stem clockwise will lower the valve disc onto the valve seat and therefore close the pipe, counter-clockwise rotation will lift the valve disc and open the pipe. The regulating function is enabled by a cone on the underside of the valve disc. The maximum diameter of the cone corresponds to the valve’s nominal diameter. The stem sealing is provided by a threaded bush and a metal bellows which ensures a complete hermetic sealing. The valves are equipped with a back seal. When the valve is fully opened it is possible to replace the threaded bush and the seal.

  • Available in steel or stainless steel
  • Selection of body material as per German DIN EN12284, AD2000 Series W
  • Working mediums: refrigerants as per EN 378 p. 1, e. g. NH3, R22, R134a and blends with refrigerator oil; neutral, gaseous and liquid mediums; glycol-based cold brine
  • Installation is possible in any position but the flow direction must be observed

HRAB Regulating Valves

Design
straightway or angle type

Material

steel or stainless steel

Nominal Size

DN 10-250

Nominal Pressure Level

PS 25, PS 40

Temperature Range

-60 °C to +150 °C

Connections

butt welding and flanged ends as per DIN and ANSI, brazed ends, threaded ends
Additional Information
available with cover extension

Get in touch

GEA AWP GmbH
Armaturenstr. 2
17291 Prenzlau
Germany

Phone: +49 3984 8559-0
Fax: +49 3984 8559-18